HM35 Series – User’s Manual
Rev. 2.0 on 1 March 2004
Page 15 of 32
6.7.b
Busy Channel Lock Out (BCLO)
Activation of this function impedes the use of the
PTT
button when the channel is busy.
Depending on the programming, the BCLO can act when it picks up any signal, or when a signal is coming from a
specific CTCSS/DCS signal.
This setting is not available by the end user. For further details, please contact your radio network administrator.
6.7.c
Selecting transmission power
Your transceiver can transmit with two different power levels, which are predefined during programming, channel by
channel. The display will always show the power selected, using the following icons:
•
- high power
•
- low power
1) Press
the
menu/
↵
button to access the command menu, then use the
buttons to highlight the
Radio Param
option.
2) Press
menu/
↵
to view the available sub-menus.
3) Press
the
buttons until the sub-menu
Power
is highlighted. The display will show the power level currently selected:
Hi
(high power) or
Lo
(low power).
4) Press
menu/
↵
to select the desired power level.
5) Exit the sub-menu by pressing the
F4/E
SC
button, then press it a second time to exit the main menu and return to the standby
screen.
