Midland Valley FieldMove Clino, User Manual

Page: 9 / 36

Compass / Clino
8
Setting location manually
Locations can be set manually without using the GPS
functionality, in Degrees / Minutes / Seconds, from the
Compass / Clino page. On the Compass / Clino page
tap on the latitude / longitude (lat / long) value in the Top
Bar this will open the lat / long Edit Location page. The
current data location is shown by the red pin.
The GPS or current location can be manually overwritten
by using a long press on the map to set a new position.
This will automatically set the GPS to
idle .
Alternatively, lat / long values can be entered in Degrees /
Minutes / Seconds using the number key pad.
If you tap the GPS arrow the GPS will turn on (
active )
and the red arrow jumps to the received location on the
map, shown as a blue dot.
Declination convention
Measurements in and exported by the app are given
relative to True North. All data is automatically adjusted to
True North. True North is calculated using the declination
value set in the
Project Details page.
Idle GPS , last
updated GPS position
is shown by blue dot
and the current
location by the red pin
Location