until you press the MIDI/SELECT knob
to finish your choice. After you
press cancel key the LED display will show blank to indicate that you
pressed cancel key and will not disappear until you press the MIDI
/SELECT knob
to finish your choice.
Program key
Pressing MIDI/SELECT and then the Program key, then the numeric keys and
then the ENTER key, you can select any patch number between 1 to 127. For
example, if you want to change voice to 67 (Tenor Sax): Press the MIDI
/SELECT knob, the program key and 67 on numeric keys, ENTER key and
then MIDI/SELECT again to finish this action.
2.1.6 Assignment of the 20 Real-time Controllers
In order to assign a Controller Knob, Fader or Pad to a MIDI Parameter (MIDI
Controller) please follow these steps:
1. Press the MIDI/SELECT knob and then SET CTRL (Controller) key (F3)
2. The last active Hardware Controller (Slider or knob) will be showed
3. Choice the knob you will program by turning it – the display shows its
number
11
