midiplus BK492, Owner'S Manual

Page: 9 / 14

MIDIPLUS Co, Ltd. http://www.midiplus.com.tw
7

LCD will show "Enter to perform".

Press the "NEXT" key. (The key on the keyboard marked "NEXT") .

LCD will show "Enter to confirm".

Press the "NEXT" key to confirm.

When Initialization is done, the LCD will go back to EDIT scene.

Press the "MODE" Button again (LED lights off) to save the edit.
2.2.3 Global Channel
Use this function to select different MIDI commands using certain keys from
your keyboard. Activating this function the keyboard becomes a set of function
Buttons for setting MIDI parameter commands.
The BK492's global MIDI channel is assigned by the following steps:

Press the "MODE" Button and the LED under the button will light on.

Press the "Channel" key.

Use "OCTAVE UP & DOWN" Buttons or "DATA ENTRY" to select the
desired channel (1-16).

Press the "MODE" Button again (LED lights off) to save the edit.
2.2.4 Program & Bank
Program message (commonly referred to program changing) is used to select
different instrument sounds in a MIDI device. Program message covers a range
of 128 instruments. These instruments are accessed by sending program
number 0 to 127.
Some MIDI devices have more than 128 instruments. In this case, the
instruments will be separated into groups by 128, called bank. You can send
bank MSB and bank LSB messages to enter into these different banks. Please
look over the owner’s manual to see how the bank change number changes the
sounds on your device.
To send a program change:

Press the "MODE" Button and the LED under the button will light on.

Press the "Program" key.

Use "DATA ENTRY" Knob or move "Octave UP & Down" Buttons to
select a desired number.

Press the "MODE" Button again (LED lights off) to save the edit.
Bank change: