midiplus 61U, Owner'S Manual

Page: 11 / 21

For example
,
In normal mode
,
this slide controller is adjusting Volume and you want it
to adjust Reverb
.
Here are operation steps
:
e and you want it to adjust Reverb
.
Here are operation steps
:
1.Press MIDI / SELECT button to enter Edit Mode
.
2.Press key Reverb Depth
.
3.Press MIDI / SELECT button again to confirm selection
.
Now
,
Data Entry Slide is adjusting Reverb but Volume
.
In Edit Mode
,
Velocity input numeric value is from 1 to 8
,
all of Reverb
,
Pan pot,and
Aftertouch input numeric value are from
0
to
127.
Program key
This option allows you to access all
128
program change commands on an external
MIDI synthesizer
.
1.While pressing MIDI/SELECT button
,“
Data Display
”
shows ;
2.Pressing Program key and
“
Data display
”
shows a number
(
one of
1
to
128),
and
then select the desire program number by pressing Numeric key
,
which input value is
1
to
128;
3.Finally,press Enter key to complete Program setting and
“
Data display
”
shows the
number you chose.
For example ,if you want to change voice to 67 (Tenor Sax): Press MIDI/SELECT button and
67 on numeric keys, then enter key and MIDI/SELECT button again to finish this action.
7
61U