OPERATION
OPERATION
1. Press down the tip of the
POWER
rocker switch with a white "1" on the back of the subwoofer to
turn on the system. The system
is then se t in
STAND-B
Y
mod e an d t he indicato r ligh
t o n the
MASTER
VOL.
knob on the front panel w
ill t urn r ed .
2 . Pres s the
POWER
button on the remote control or the
STAND-BY
button on the front panel
of the subwoofer once, and the system will switch to
OPERATING
mode and the indicator light
on the
MASTER
VOL.
will turn green.
3. Press the
AC-3,
TV, TAPE
or the
CD/VCD/DVD(2-CH)
button to choose the right source of audio
input mode, and its corresponding indicator light will turn green.
4. Rotate the following knobs on the front panel of the subwoofer clockwise to a suitable listening
level:
a)
CENTER
b)
WOOFER
c)
SURROUND
d)
MASTER VOL.
Or, press the
VOLU
ME
UP
and
VOLUME
DOWN
buttons on the remote control to adjust
the volume level of the system:
a) press the
VOLUME
UP
button, andt he
M
ASTER V
OL.
k nob o nth e fr ont p anel of th esu bwoofer
will turn clockwise and the volume level of the system will be increased.
b) press the
VOLUME
DOWN
button, a nd t he
M
ASTER V
OL.
k nob o n t he f ront p anel o f th e s ub-
woofer will turn counterclockwise a nd t he volume level of the systemw
ill be decreased.
5. Press the
MUTE
button on the remote control once to turn off the volume of the system , and
the
mute indicator light on the front panel of the subwoofer will turn green, To turn on the volume of
the system, press the
MUTE
button again and the mute indicator light will turn off.
It is recommended that the
POWER
rocker switch on the back of the subwoofer be turned off and
that the AC power cord be unplugged from the supply when the system is left unused for a long
period of time.
BATTERY INSTALLATION
BATTERY INSTALLATION
IMPORTANT NOTES
IMPORTANT NOTES
< AC Power >
Make sure that the power supply is correct and never handle the power cord or its plug with wet
hands when plugging into, or unplugging from, a n o
utlet.
Ensure that the main power switch is in the "OFF" position before connecting the AC power cord
to the power supply to avoid damage to the system.
A damaged power cord can easily cause an electric shock or fire hazard. Neve r use a powe r cord
after it has been damaged.
Batteries( AAA t ype)
*
10
10
