Tait TM-8000 Mobiles:
Set the Programmable I/O on the Digital tab as follows:
1. Set Pin IOP_GP101 to Output > PTT > Reflect PTT Status > Active Low.
2. Set Pin IOP_GP102 to Input > PTTOUT > External PTT 1 > Active Low.
3. Set Pin IOP_GP103 to Output > MODE > F1 Key Status > Active Low >Latching.
Note:
This can also be set
to F2, F3 or F4. F2, F3 and F4 can also be set to momentary to allow for code selection in addition to mode.
4. Set Pin IOP_GP106 to Output > Busy Status > Active Low.
Set the Programmable I/O on the Audio tab as shown in the diagram below.
4
