20
VX-800
:
For the VX-800 radio programming software CE-31 v1.20 or higher (DOS) or v1.05 (Windows) must be used.
Read the radio with the option board installed. Select “Common” from the menu and then “Miscellaneous”. Set
the “Encryption Type” to “Hi Level”. This will also change the “Encryption Device” setting under “Common” >
“Option” to “Yes”.
Under the “Common” heading select “Key Function” to set which key will control the Emergency ANI or Lone
Worker on/off. Set the “SEL1 Key” (top orange button), “SEL2 Key” (top gray button), or the A, B, C, or D (keypad
models only) button to “ACC1”. The assigned button will then control the Emergency ANI.
In the main screen, in the “ENCR” column, every channel must have the flag checked. NOTE: This does not
provide encryption on a per channel basis.
Download the program to the radio.
VX-820 & VX-920
:
For the VX-820/920 radio programming software CE-59 v2.10 or higher must be used.
Read the radio with the option board installed. Select “Common” from the menu and then “Option”. The “Option
Unit” should be read as “FVP-35”.
Under the “Common” heading select “Key Function” to set which key will control the Emergency ANI or Lone
Worker on/off. Program the desired button to “Option SW1” or “Option SW2”. Option SW1 is momentary and
Option SW2 is latched.
Download the program to the radio.
VX-2100 & VX-2200
:
For the VX-2100 & VX-2200 radio programming software CE-82 v1.04 or higher must be used.
Read the radio with the option board installed. Under the “Common” heading select “Key Function” to set which
key will control the Emergency ANI or Lone Worker on/off. Set the “P1-P4 Short Press” button to “Option SW”.
Download the program to the radio.
VX-4100 & VX-4200
:
For the VX-4100 & VX-4200 radio programming software CE-59 v1.01 or higher must be used.
Read the radio with the option board installed. Select “Common” from the menu and then “Option”. The “Option
Unit” should be read as “FVP-35”.
Under the “Common” heading select “Key Function” to set which key will control the Emergency ANI or Lone
Worker on/off. Set the “P1-P4” or “A” button to “Option Switch 1”.
Download the program to the radio.
NOTE:
The VX-4100 & VX-4200 currently does not provide the unit with a COR Input, therefore program the unit
for Wake on VOX feature should be used rather than Wake on COR.
