![background image](http://html.mh-extra.com/html/midea/wqp8-3802d/wqp8-3802d_instruction-manual_1791033021.webp)
21
TROUBLESHOOTING TIPS
Before Calling For Service
Reviewing the charts on the following pages may save you from calling for service.
Problem
Possible causes
Solution
Dishwasher doesn't
start
Power supply is not
turned on.
Fuse blown, or the
circuit breaker tripped.
Make sure the dishwasher is turned on and
the door is closed securely.
Make sure the power cord is properly
plugged into the wall socket.
Replace fuse or reset circuit breaker.
Remove any other appliances sharing the
same circuit with the dishwasher.
Make sure to close the door property and
latch it.
Water not pumped
from dishwasher
Kink in drain hose
Door of dishwasher
not properly closed.
Check drain hose.
Filter clogged.
Check the coarse filter.
(see section titled " Internal Care ")
Kitchen sink clogged.
Check the kitchen sink to make sure
it is draining well. If the problem is
the kitchen sink that is not draining ,
you may need a plumber rather than
a serviceman for dishwashers.
Suds in the tub
Improper detergent
Use only the special dishwasher detergent
to avoid suds. If this occurred, open the
dishwasher and let suds evaporate.
Add 1 gallon of cold water to the tub.
Close and latch the dishwasher, then
Start any wash cycle to drain out the
water. Repeat if necessary.
Spilled rinse-aid.
Always wipe up rinse-aid spills
immediately.
Stained tub interior
Detergent with
colourant may
have been used.
Make sure that the detergent has no
colourant.
White film on
inside surface
Hard water minerals.
To clean the interior, use a damp sponge
with dishwasher detergent and wear
rubber gloves. Never use any other cleaner
than dishwasher detergent for the risk of
foaming or suds.
Summary of Contents for WQP8-3802D
Page 20: ...Step 2 Install the dishwasher in cabinet 20 ...
Page 26: ...PARTⅡ Special Version WQP8 3802D ...
Page 44: ......