![background image](http://html.mh-extra.com/html/midea/wqp4-2605/wqp4-2605_instruction-manual_1791021028.webp)
Protect against freezing
please take frost protection measures on the dishwasher in winter
.
Each time after
washing cycles, please operate as follows.
1. Cut off
electrical power to the dishwasher
.
2. Turn o
ff
the water supply and disconnect the water inlet pipe from the
water valve.
3. Drain water from the inlet pipe and water valve (Use a pan to catch the water).
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak up water
in the sump.
NOTE
If your dishwasher cannot work because of the ice, please contact
authorised service person.
Cleaning the spray arms
The spray arms can be easily removed for periodic cleaning of the nozzles to prevent
possible clogging. Wash them under running water and carefully replace them in
their seats, checking that their rotary movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove it. Wash the arms
under a jet of running water and replace it carefully to its seat. After reassembly
,
check that the spray arms rotate freely
.
Otherwise, check that they have been
installed correctly.
28