Midea WHK 7.62 BL, User Manual

Page: 23 / 32

INSTALLATION
Fix the brackets:
•
Drill at the marked points (1) (2) (3), using a
ɸ
10 mm drill bit.
•
Insert the Wall Plugs 11 into the holes (1) (2) (3).
• Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) supplied with the hood.
• Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) supplied with the hood.
Hook the hood body:
• Open the panel.
• Remove the Metal grease filter using the handles provided.
•
Hook the hood body to the bracket 20.
• Level the hood body itself.
• From the inside of the hood body, fix the screws 10 to Wall Plugs 11 at the points (3).
•
Fit the filter into the hood.
• Close the panel.
Right Wrong
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the
hood to the chimney using either a flexible or
rigid pipe
ɸ
150 or
ɸ
120 mm, the choice of which
is left to the installer.
• To install a
ɸ
120 mm air exhaust
connection, insert the reducer flange 3
on the hood body outlet.
•
Fix the pipe 4 in position using sufficient
pipe clamps (not supplied).
•
Remove possible charcoal filters.
DE
EN
6