Midea VCS2, User Manual

Page: 14 / 20

t
Figure 1 Figure 2
represent that there will be steam sprayed. Caution! Hot.
Do not dismantle the machine unless it is done by professionals. Do
not dismantle the machine while it is in use, otherwise it may cause
injury.
Check the power cord and mopping nozzle regularly. Stop using it
immediately if it is damaged.
If the power cord is damaged, it must be replaced by professionals
from the manufacturer, its maintenance department or similar parties
to avoid danger.
Please check and make sure that the water tank is filled with
appropriate amount of purified water before plugging in. The
maximum capacity of water tank is 0.42L.Make sure you only add
water to the tank as chemicals or cleaning solution may cause
damage to the machine.
When it is idling, please make sure that the plug is disconnected and
the temperature of boiler has dropped to room temperature,
otherwise it may cause injury.
Prevent the liquid in the machine or the steam ejected from the
machine spilling to the operating equipment (including
components), otherwise it will cause damage.
When the machine is started or working, do not aim the air outlet at
people or animals, otherwise it may cause injury.
There may be some water in the water tank even for a new steam
mop. This is because we carried out testing on all our steam mops.
•
•
•
•
•
•
•
•
•
Functional Operation
Safety instructions and precautions!
Operating Instructions:
1) Fill the water tank with appropriate amount of purified water.
1-1. Lie-down the steam mop, press and hold the release button of
water tank with one hand, and remove the water tank with the other hand, as
shown in Figure 1;
1-2. Remove the sealing plug of the water tank. Fill in appropriate amount of
purified water (do not use tap water), as shown in Figure 2;