background image

 Page 12 

Care and Maintenance

3       

Ca

re and 

Maintenance

Cleaning Your Indoor Unit

 BEFORE CLEANING OR

 

 MAINTENANCE

ALWAYS TURN OFF YOUR AIR CONDITIONER

SYSTEM AND DISCONNECT ITS POWER SUPPLY

BEFORE CLEANING OR MAINTENANCE.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 CAUTION

Only use a soft, dry cloth to wipe the unit clean. 

If the unit is especially dirty, you can use a cloth 

soaked in warm water to wipe it clean.

• 

Do not

 

use chemicals or chemically treated 

cloths to clean the unit

• 

Do not 

use benzene, paint thinner, 

polishing powder or other solvents to clean 

the unit. They can cause the plastic surface 

to crack or deform.

• 

Do not

 use water hotter than 40°C (104°F) 

to clean the front panel. This can cause the 

panel to deform or become discolored.

Cleaning Your Air Filter

A clogged air conditioner can reduce the cooling 

efficiency of your unit, and can also be bad for 

your health. Make sure to clean the filter once 

every two weeks.
1.  Lift the front panel of the indoor unit. 
2.  First press the tab on the end of filter to 

loosen the buckle, lift it up, then pull it 

towards yourself.

3.

 

Now pull the filter  out.

4.  If your filter has a small air freshening filter, 

unclip it from the larger filter. Clean this air 

freshening filter with a hand-held vacuum.

5.  Clean the large air filter with warm, soapy 

water. Be sure to use a mild detergent.

6. 

Rinse the filter with fresh water, then shake 

off excess water.

7. 

Dry it in a cool, dry place, and refrain from 

exposing it to direct sunlight.

8. 

When dry, re-clip the air freshening filter to 

the larger filter, then slide it back into the 

indoor unit.

9. 

Close the front panel of the indoor unit.

 CAUTION

Do not touch air freshening (Plasma) filter for 

at least 10 minutes after turning off the unit.

Remove air freshening 

f

ilter from back of 

larger filter (some units)

Filter Tab

 Page 13 

 CAUTION

• 

Before changing the filter or cleaning, 

turn off the unit and disconnect its power 

supply.

• 

When removing filter, do not touch metal 

parts in the unit. The sharp metal edges can 

cut you.

• 

Do not use water to clean the inside of the 

indoor unit. This can destroy insulation and 

cause electrical shock.

• 

Do not expose filter to direct sunlight when 

drying. This can shrink the filter.

Air Filter Reminders (Optional)

Air Filter Cleaning Reminder

After 240 hours of use, the display window on 

the indoor unit will flash “CL.” This is a reminder 

to clean your filter. After 15 seconds, the unit will 

revert to its previous display.
To reset the reminder, press the 

LED 

button 

on your remote control 4 times, or press the

MANUAL CONTROL 

button 3 times. If you don’t  

reset the reminder, the “CL” indicator will flash 

again when you restart the unit.

Air Filter Replacement Reminder

After 2,880 hours of use, the display window on 

the indoor unit will flash “nF.” This is a reminder 

to replace your filter. After 15 seconds, the unit 

will revert to its previous display.
To reset the reminder, press the 

LED 

button

 

on your remote control 4 times, or press the

MANUAL CONTROL 

button 3 times. If you don’t  

reset the reminder, the “nF” indicator will flash 

again when you restart the unit.

 CAUTION

• 

Any maintenance and cleaning of outdoor 
unit should be performed by an authorized 
dealer or licensed service provider.

• 

Any unit repairs should be performed 
by authorized dealer or licensed servic

provider.

Maintenance – 

 

Long Periods of Non-Use

If you plan not to use your air conditioner for an 

extended period of time, do the following:

Clean all filters

Turn on FAN function until 

unit dries out completely

Turn off  the unit and               

disconnect the power 

 

Remove batteries  

from remote control

Maintenance – 

 

Pre-Season Inspection

After long periods of non-use, or before periods 

of frequent use, do the following:

Check for damaged wires

Clean all filters

Check for leaks

Replace batteries

Make sure nothing is blocking all air inlets and outlets

Ca

re and 

Maintenance

Summary of Contents for Ultimate Comfort Series










Reviews: