Midea SC861, Instruction Manual

Page: 8 / 16

8
SOLVING POTENTIAL PROBLEMS
Problem Possible cause Possible solutions
The appliance does not
work.

The male plug may not
be properly plugged
into the wall socket.

There is no power in
the wall socket.

Push hard on the plug
to make sure it is well
placed.

Check the fuse or
cut-off the power and
check if fuse should be
changed.

Contact a qualified and
authorized employee
of the after-sales
service.
The vacuum cleaner has
little, or no, power.

The dust container is
not correctly installed

The dust container is
full.

One, or several, filters
are blocked.

Put the dust container
back in the appliance
again, making sure it is
properly placed.

Empty the dust
container.

Clean and rinse the
filter (s) with warm or
cold water.

Turn off the appliance
and unplug. Check if
the suction end and/or
the accessories are
not blocked in any way.
Dust comes out of the
vacuum cleaner.

The dust container is
not correctly installed.

The dust container is
full.

Put the dust container
back in the appliance
again, making sure it is
properly placed.

Empty the dust
container.
The accessories do not
suck in any dust.

A dust container is full.

One, or several, filters
are blocked.

The suction end is
blocked.

Clean the dust
container.

Clean and rinse the
filter (s) with warm or
cold water.

Turn off the appliance
and unplug. Check if
the suction end and/or
the accessories are
not blocked in any way.