MCAC-RTSM-2013-12
Midea High-temperature Direct-heating Heat Pump Water Heater Technical Manual
40
5. Setting working mode
Pressing “SET” key three times to enter the working mode setting page, then pressing the“▲” or “▼”
key to adjust , after selecting your need mode you can press “OK” key or wait seven seconds to
confirm; During setting process you can
press “CANCEL” key to exit without saving. The controller
will show different working mode when it is applied to different main unit respectively.
6. Setting clock
Press the “SET” key 4 times to enter clock setting. The hour of the clock will flash, which means the
current setting is the hour of the clock, press the “▲” or “▼” to adjust, press “
” key when finished,
and then the minute of the clock will flash, it means the current setting is the minute of the clock,
press th
e “▲” or “▼” to adjust, press “OK” key when finished or wait for 7 seconds to confirm. During
the setting process you can press
the “CANCEL” key to exit without saving.
7. Setting water level
You can p
ress the “SET” key 5 times to enter the water level setting, then press “▲” or “▼” to adjust
the water level, at last
press “ OK ”key when finished or wait for 7 seconds to confirm. During the
setting process press the “CANCEL” key to exit without saving. The setting value is 50%, 75%
or100%. You can press
“
” or “
” key under main page to check the water level which has been
set.
