![background image](http://html1.mh-extra.com/html/midea/romstol-ecoheat/romstol-ecoheat_operation-manual_1791876053.webp)
50
1(PLC: 40002)
Setting the mode
Bit8-Bit15 Water temperature T1s is corresponding to the floor heating.(zone 2)
Bit0-Bit7
Water temperature T1s is corresponding to the floor heating.(zone 1)
3(PLC: 40004)
Setting air temperature Ts
4(PLC: 40005)
T5s
BIT15
Reserved
BIT14
Reserved
BIT13
1: climate curve setting is valid; 0: climate curve setting is invalid. (zone2)
BIT12
1: climate curve setting is valid; 0: climate curve setting is invalid. (zone1)
BIT11
DHW pump's running constant-temperature water recycling
BIT10
ECO mode
BIT9
Reserved
BIT8
Holiday home (the status can only be read, not changed)
BIT7
0: Silent mode level1; 1: Silent mode level2
BIT6
Silent mode
BIT5
Holiday away (the status can only be read, but cannot be changed)
BIT4
Disinfect
BIT3
Reserved
BIT2
Reserved
BIT1
Reserved
BIT0
Reserved
Bit8-Bit15 Climate Curve 1-9(zone 2)
Bit0-Bit7
Climate Curve 1-9(zone 1)
7(PLC: 40008)
Forced water heating
8 (PLC: 40009)
Forced TBH
9(PLC: 40010)
Forced IBH1
10(PLC: 40011)
t_SG_MAX
The room temperature range is between 17°C and 30°C, and is valid when there is Ta.
Portocol value=actual value*2
The water tank temperature range is between 20°C and 75°C.
Leaving water temperature T1s setting range instruction:
In cooling mode, T1S low temp setting range is 5~25°C;T1S high temp setting range is 18~25°C.
In heating mode, T1S low temp setting range is 22~55°C;T1S high temp setting range is 35~70°C.
5(PLC: 40006)
Function Setting
6 (PLC: 40007)
Curve selection
0: Invalid
1: Forced
on
2: Forced
off
TBH is the electric water tank heater.
IBH1 and 2 are the hydraulic module's rear electric heater.
IBH1 and 2 can be activated together.
TBH cannot be activated together with IBH1 and IBH2.
1: Auto; 2: Cool; 3: Heat; Others: Invalid
2(PLC: 40003)
Setting water water
temperature T1S
0-24 Hours
Summary of Contents for romstol ecoHEAT
