background image

Specifications subject to change without notice.

Service Manual

RG58D/BGEFU1

Wireless Remote Controller

TABLE OF CONTENTS

PAGE

INTRODUCTION

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HANDLING THE REMOTE CONTROLLER

2

. . . . . . . . . . . . . . . . .

FUNCTION BUTTONS

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ACCESSING THE SERVICE FUNCTIONS

4

. . . . . . . . . . . . . . . . . . .

REMOTE CONTROLLER FUNCTIONS

5

. . . . . . . . . . . . . . . . . . . . .

Auto−Start Function (F1)

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Auto−Start Function (F1)

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Heating Temperature Compensation (F2)

5

. . . . . . . . . . . . . . . . . . . .

Anti−Cold Air Function (F3)

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Indoor Fan Motor Speed Control after Set Temperature is Reached (F4) 6

Louver Angle Memory Function (F5).

6

. . . . . . . . . . . . . . . . . . . . . . .

Heating Only or Cooling and Heating Setting (F6).

7

. . . . . . . . . . . . .

Cooling Temperature Compensation (F7).

7

. . . . . . . . . . . . . . . . . . . .

Refrigerant Leakage Detection (F8).

7

. . . . . . . . . . . . . . . . . . . . . . . .

Cleaning Filter Reminder (F9).

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Filter Replacement Reminder (E1).

7

. . . . . . . . . . . . . . . . . . . . . . . . .

Lowest Temperature Setting (E2).

8

. . . . . . . . . . . . . . . . . . . . . . . . . .

Highest Temperature Setting (E3).

8

. . . . . . . . . . . . . . . . . . . . . . . . . .

Special Anti−Cold Air Function Setting (E4).

8

. . . . . . . . . . . . . . . . .

Priority Setting of Heating or Cooling (only on Multi−Zone Systems)
(E5).

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network Address Setting (E6).

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Capacity Code Selection (E7).

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Twins Setting (E8).

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Static Pressure Setting (E9).

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DEFAULT VALUES OF INDOOR UNITS

9

. . . . . . . . . . . . . . . . . . . .

POINT CHECK FUNCTION

9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CODE VALUE

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INTRODUCTION

This service manual provides the necessary information to use the
service functions on the RG58D/BGEFU1 wireless remote controller.

Use the Table of Contents to locate a desired topic.

Fig. 1

 - 

Remote Controller

Summary of Contents for RG58D/BGEFU1











Reviews: