4
ASSEMBLY INSTRUCTIONS
PART FIGURE
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER
THE HEATER.
Unpack your heater and
find
the wheel-holding plate and
butterfly
nuts
between the
fins
assemblies.
1. Make sure the heater is unplugged and in the "0" position.
2.
Turn the heater upside down.
3. Attach the wheel-holding plates onto the heater as
Fig.1 shows. The U plate is
fixed
between the last
tow
fins
and the other one is
fixed
under metal
control box.
Fix the castors to the vertical axis of both the wheel
holding plates.
4. Insert the
butterfly
nuts and tighten them securely.
5.
Turn the heater upright.
Your heater is now ready to use.
Radiating unit
Air inlet
Caster assembly
Power switch knob
Air inlet
Cord wrap
Carry handle
Thermostat knob
Air inlet
