Protection for topple and fall
ECO energy saving function
The default setting temperature is 24
℃
when ECO energy-saving mode is chose. The
heating gear will be chose automatically based on relationship between environment
temperature and setting temperature.
When the machine is dumping, the "1h, 2h" indicator light flashes all the time, the
buzzer rings for 10 times, and the machine shuts down automatically. After the machine
is straightened, the ON/OFF button needs to be operated again before the machine can
resume normal operation.
Oscillating function
Under startup state, shortly press oscillating button to start/close oscillating function.
High temperature protection
When environment temperature is higher than 50
℃
, all load output will be closed in
the system. "1h, 2h and 4h" indicator light will flash all the time and the buzzer will
long ring 10 times with invalid button pressing. When environment temperature is lower
than 50
℃
, high temperature protection mode can be cancelled only after powering off.
Open/short circuit protection function of temperature sensor
When open circuit fault of temperature sensor exists, under any working mode, the
"1h" indicator light will flash all the time and the buzzer will long ring 10 times; When
short circuit fault of temperature sensor exists, the "2h" indicator light will flash all the
time and the buzzer will long ring 10 times;
Function setting
Circularly switch the following by pressing mode button on the whole machine/the
remote after starting the machine: Low gear of normal mode → EC
O energy saving
mode → high gear of normal mode; Shortly press ECO button on th
e remote can
switch into entering/exiting ECO energy-saving mode.
Timing function
a. Timed shutdown
Under startup state, shortly press timing button on the whole machine/remote can
set time for timed shutdown within 0-7 hours.
b. Appointed startup
Under standby state, shortly press timing button on the whole machine/remote can
set time for appointed startup within 0-7 hours.
Temperature setting
After booting, short press the temperature setting key on the machine or the "+ /-" key
on the remote control to set the target temperature. The temperature setting range is
18-30
℃
. When the ambient temperature reaches the set temperature, the ma- chine
stops heating, and the current gear indicator flashes 15 seconds and returns normal;
When the ambient temperature is lower than the set temperature, the machine heats
normally.
Start the machine
Startup of the machine can be conducted by pressing standby button (or pressing
ON/OFF button on the remote) after power light “ ” is lit up. The machine
will work under high gear working state with alight high gear indicator light.
OPERATING INSTRUCTION
3
