Page 9
To quickly begin operating the air conditioner, follow these steps:
1. Set the thermostat to the lowest number (coldest setting).
2. Set the selector control to the highest COOL setting.
3. Adjust the louver for comfortable air flow (see Air Directional Louvers).
4. Once the room feels colder, adjust the thermostat to the setting you find most
comfortable.
5. Make sure that the air flow inside and outside are not obstructed by anything.
6. This air conditioner is designed to be operated under conditions as follows:
Oper
ating
Ins
tructions
Cooling Operation
Outdoor temp.: 18-43°C (64°F ~ 109°F)
Indoor temp.: 17-32°C (62°F ~ 90°F)
NOTES
• The relative hu
m
idity of roo
m
should be less than 80%. If the unit is used in a
condition with a relative hu
m
idity over 80%, there will be condensed water on the
surface of the unit.
• Perfor
m
ance
m
ay be reduced outside of these operating te
m
peratures.
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the unit control panel alone or with the remote controller.
(ON/OFF) Button
The unit will initiate automatically the
Energy saver function under Cool, Dry,
Auto (only Auto-Cooling and Auto-Fan)
modes.
Key Pad Features
Auto
Timer
Energy
Saver
Power
Button
LED
Display
Sleep
Mode
Check
Filter
Fan
Speed
Remote
Signal
Receptor
Temp/Timer
Control
Mode
Selector
Temp/Timer
Control
NOTE
If the unit turns off unexpectedly due
to a power outage, it will restart with
its previously set fuctions when the
power resu
m
es.
