clean the floor.
4. As in fig.14 , tread on the pedal of the brush tool again to put the bristles in, and
you can clean the carpet.
Fig.11 Fig.12
Fig.13 Fig.14
MAINTENANCE
HOW TO MAINTAIN
1.
The filter should be cleaned twice a year, and when there is obvious dirt on the
filter, it is time.
2.
You must fix the filter properly before running the vacuum cleaner.
3.
The filter can't be cleaned in the washing machine or baked by the blower.
4.
It will reduce the suction power and damge the motor if you use the wet filter.
5.
Steps for maintenance:
1) As in fig.15, press the outlet lock to open the outlet board.
2) As in fig.16, get out the outlet filter.
3) As in fig.17, rotate the HEPA cover to separate it from the chamber cover
4) As in fig.18, get the HEPA cover
5) As in fig.19, get the HEPA and wash it.
6) Wash the HEPA cover, the HEPA assembly, the outlet sponge and the dust
chamber in the water without detergent and dry them before use.
7) Fix the HEPA assembly on the chamber cover and make sure three salient cubes
should be stuck in the grooves of the dust chamber.
8) Rotate the HEPA assembly in the direction of the mark on the chamber cover.
9) Assemble the chamber cover assembly and the dust chamber according to the
mark outside.
10) Put the dust chamber assembly into the machine. And in this process, first you
should make the chamber in the right position and then press the handle of the dust
chamber, if there is a cluck it means the operation is successful.
