1-3. Fill in appropriate amount of purified water, and then put the sealing plug
back to water tank, as shown in Figure 3;
1-4. Put the water tank filled with appropriate amount of purified water back
to the main body, as shown in Figure 4.
2) Use in mop state
Attention!
1. Check and make sure that the water tank has been filled with appropriate
amount of purified water, and the mopping assembly, mop cloth and handle
assembly are all installed in place;
2. Before connecting the plug to the socket, make sure that the voltage is
consistent with the rated voltage marked on the nameplate;
3. When the machine is started or working, do not aim the air outlet at people or
animals, otherwise it may cause injury.
2-1. Install handle assembly:
Connect the end with latch on the handle assembly to the end with button on
the main body. When you hear a “click”, it is installed in place, as shown in
Figure 5.
Figure 3
Figure 5
Figure 4
6
