background image

1

Contents

Safety Introduction
Product Introduction
Product Operation
Product Maintenance
Troubleshooting

1

2

4

6

10

●   

Do not place the machine close to heat sources, radiation, or burning cigarette.

     Do not use the appliance to remove the following objects:

     1. All liquids such as water and solvents.

     2. Lime, cement, ash and other construction dust and garbage.

     3. Hot objects, such as cigarette butts.

     4. Sharp objects, such as glass shards, etc.

     5. Inflammable and explosive articles, such as gasoline or alcohol products.

●   

Do not let children play with or operate the machine to prevent accidents.

●   

Your machine is an electric appliance: It must be used appropriately. 

     Do not leave the machine unattended.

●   

The power must be turned off during cleaning, maintenance or when in storage.

●   

Do not pull the power plug to turn off the appliance. 

     Hold the plastic part of the plug to remove it from the power socket.

●   

The power supply voltage must correspond to that of the machine  using  voltage.

●   

Keep the power cord away from sharp objects to prevent it from being damaged.

●   

To prevent fires do not immerse the machine  using  in water, do not expose it to any heating appliances.

   
●   

In the case of below situations do not use the machine  and send it immediately to the nearest 

     approved maintenance facility :
  - The appliance fell and consequently damaged.
  - The power cord is damaged.

●   

Stop operating the machine if the suction inlet is blocked to prevent damages (such as overheating)

      to the motor or deformations to the vacuum plastic parts occasioned by overheating motor.

SAFETY INSTRUCTIONS 

SAFETY

WARNING

The appliance is not to be used by persons (including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.

Children being supervised not to play with the appliance

If the supply cord  is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard.

WARNING — This appliance contains a UV emitter. Do not stare at the light source

Summary of Contents for MVC-B500VM








Reviews: