Midea MVC-16T-B, User Manual

Page: 15 / 16

Exception handling
If there is any unusual condition when using VC, please refer to the table
below.
The vacuum cleaner does not work
Possible reason Processing method
Power plug is not stuck on
the socket Reinsert the plug
Power supply socket
without electricity Check the circuit breaker
Switch does not open Press the switch of VC
Motor thermal protector Pull the plug and wait for
thermal protector
Suction abate
Possible reason Processing method
The main brush or
accessories block Clear the blockage
Dust in the dust cup is too
full Clear rubbish timely
Too much dust in filter Clear filter
Dust leak out form the VC
Possible reason Processing method
Filter is broken Replace filer t
Filter is not installed in
place Reinstall filter
力减弱
Warning
The plug must be removed from the power socket
before any maintenance or replacement.
If the power cord is damaged, replace them only by the
factory or maintenance center or similarly qualified persons
.