Midea MT1250G, Owner'S Manual

Page: 17 / 21

Washing Programmes Table
10
16
XXXX XXXX
XXXX XXXX
XXXX XXXX
XXXX XXXX
OPERATIONS
Programmes
Programmes are available according to the laundry type.
The washing machine will select the water level automatically
according to the load weight.
1. When there's water in the tub, this function is not available;
2. Before press [Start/Pause] button, if consumer selected the
water level, there will be no fuzzy weighting function;
3. After press [Start/Pause] button, the washing machine will run
the fuzzy weighting function. Consumer can also select the water
level to set the water level as needed.
Standard(Normal)
Standard fabric washing program, suitable to wash ramie cotton fabric.
Quick: Suitable to wash light stained clothes and clothes in summer.
Heavy:
Suitable to wash heavy stained/wearable clothes
.
Fuzzy weighting:
Soak
Only for washers having these function
Air Dry
As for not easily fading, deforming , and non-waterproof clothes ,
can use the function
to dry clothes without heating, and to reach
the result of being dried in a room.
By the intermittent spinning, clean the dirt of inner & outer tub
and impeller.
Delicate wash, especially for silk fabrics.
Delicate
ECO
1 time rising is suitable for light contaminated clothes in order
to save water.
Start up Fast Clean Stystem : Power on, select “Normal",”Soft",
"Soak","Strong" program, then press FCS button. then press
“Start/Pause” button, FCS function starts up. The relative figures
will be showed after FCS function starts up.
Cancellation of FCS function: when the FCS function was selected,
The function can be cancelled by pressing any button except
“Water level”,“Delay”,or
power off.
FCS
Baby Care:
Increase the rinsing times, to reduce the detergent residue on the clothes.
Suitable to wash children's clothes.
Tub(Drum) Clean:
Press the button to select soak time.
Memory:
Memory procedure, It can remember all the washing parameters
which users have set up, such as water level, washing time, rinsing
times etc. Memory procedure is effective after you press the
start/pause button, next start when you choose the Memory procedure,
You can see all the state which you choose last time.
Soft:
Mid/High/Low water level selection, the tempo is soft, slow washing
and spinning speed, to make the lightest wear and deformation.
Strong:
The wash time is longer, the stream is stronger, so the washing
effect is better.