![background image](http://html1.mh-extra.com/html/midea/mmw20s/mmw20s_instruction-manual_1791408014.webp)
14
11. Beverage
(a) Press “
BEVERAGE
” repeatedly until the number you wish appears in the display,
“1”,”2”,”3” cup will display in order. One cup is about 120ml. For example, press
“
BEVERAGE
” once, “1” appears.
(b) Press “
START/+30 SEC.
” to cook, buzzer sounds once. When cooking is finished,
buzzer will sound 5 times and then the procedure will turns back to waiting state.
12. Dinner Plate
(a) Press “
DINNER PLATE
” repeatedly until the number you wish appears in the display,
“250”, “350”, “500” g will display in order.
For example, press “
DINNER PLATE
” once, “250” appears.
(b) Press “
START/+30 SEC.
” to cook, buzzer sounds once. When cooking is finished,
buzzer will sound 5 times and then the procedure will turn back to waiting state.
13. Pizza
(a) Press “
PIZZA
” repeatedly until the number you wish appears in the display, “100”, “200”,
“400” g will display in order.
For example, press “
PIZZA
” once, “100” appears.
(b) Press “
START/+30 SEC.
” to cook, buzzer sounds once. When cooking is finished,
buzzer will sound 5 times and then the procedure will turn back to waiting state.
14. Memory Function
(1) Press “
0/MEMORY
” to choose memory 1-3 procedure. The screen will display”1”, “2”,
“3”.
(2) If the procedure has been set, press “
START/+30 SEC.
” to use it. If not, continue to set
the procedure. Only one or two stages can be set.
(3) After finishing the setting, press “
START/ +30 SEC.
” once to save the procedure and
turn back to the waiting states. If press “
START/+30 SEC.
” again, it will start cooking.
Example: to set the following procedure as the second memory, that is memory 2; to cook
the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press “
0/MEMORY
” twice, stop pressing until the screen displays “2”.
b. Press “
TIME COOK
” once, then press “3”,”2”,”0” in order.
c. Press “
POWER
” once, “PL10” display, then press “8” and “PL8” displays.
d. Press “
START/ +30 SEC.
” to save the setting. Buzzer sounds once then turn back to
waiting states. If you press “
START/+30SEC.
” twice after step c, the procedure will be
saved as the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is cut off, the
procedure will need to be reset.
f. If you want to run the saved procedure, in waiting states, press “
0/MEMORY
” twice,
screen displays “2”, then press “
START/+30SEC.
” to run.