16
Auto operation
When unit is first installed and connected to power the
OPERATION indicator on the display panel of the
indoor unit starts flashing.
1. Press the
ON/OFF
button
to start the air
conditioner.
2. Press the
MODE
button
to select Auto.
3. Press the UP
or DOWN
button to
set the desired temperature. The temperature
can be set within a range of 17
O
C~ 30
O
C in
1
O
C increments.
NOTE:
1. When
AUTO
mode is selected, the air
conditioner chooses the appropriate mode of
either Cooling, Fan, or Heating modes by
sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
2. When In the Auto mode, you cannot change
fan speeds as they are set automatically.
3. If the Auto mode is not comfortable for you, the
desired mode can be selected manually.
Cooling /Heating/Fan or Dehumidifying operation
1. As above, pressing the
MODE
button
allows you to select COOL, HEAT, Fan or
Dehumidify modes.
2. Press the UP
or DOWN
buttons
to set the desired temperature. The
temperature can be set within a range of
17
O
C~ 30
O
C in 1
O
C increments.
3.
Press the FAN button
to select fan speed in
four steps - Auto, Low, Med, or High
.
NOTE:
In the Dehumidifying mode, you cannot
change the fan speeds as they are set
automatically.
In the FAN mode, the setting temperature is
not displayed on the remote control and you
are not able to control the room temperature
either
