background image

4

SAFETY INSTRUCTIONS

The electric

 

shock!

Warning!


•     
•     Hands shall not be inserted into running spin-dry tub .
•     If the spin-dry tub does not stop within 15 seconds after 
       opening the cover , please stop using the machine and
       have it repaired.   
•     Before any maintenance the device, unplug the appliance
       from the mains.
•     Always unplug the machine and turn off the water supply 
       after 

use. 

The max. inlet water pressure, in pascals. The 

       min. inlet water pressure, in pascals.
•     To ensure your safety, power plug must be inserted into 
       an earthed three-pole socket. Check carefully and make sure 
       that your socket is properly and reliably earthed.
•     Make sure that the water and electrical devices must be
       connected by a qualified technician in accordance with the
       manufacturer's instructions  and local safety regulations.

 

    

Do not put washing machine at humid place.

This appliance is for indoor use only.

Note!
This

 

combination

 

of

 

symbol

 

and

 

signal

 

word

 

indicates

 

a potentially dangerous

 

situation

 

which

 

may

 

result

 

in

 

slight

 

or minor

 

injuries.

Summary of Contents for MFW-752S























Reviews: