![background image](http://html1.mh-extra.com/html/midea/mfc80-du1403b-c14e-eu-ne/mfc80-du1403b-c14e-eu-ne_owners-manual_1791831011.webp)
9
10
INSTALLATION
1.
Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washer dryer
• The
lock nuts
on all four feet must
be
screwed tightly
against
the
housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To
prevent leakage or water damage, follow the
instructions in
this
chapter
•
Do
not
kink, crush, modify
or sever water
inlet
hose.
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
!
2
3
4
1
Raise
Lower
Lock
nut
foot
Warning!
!
Warning!
!
Loosen clamp nut and
four bolts
Tighten clamp nut
Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2
3
4
1
Connection finished
clamp nut
Tap with threads and inlet hose
Special tap for washer dryer
2.Connection between screw tap and inlet hose.
slide bushing