background image

Failure to install the appliance correctly could void any 

warranty or liability claims.

This appliance is not intended for use by persons(including

children) with reduced physical,sensory or mental 

capabilities,or lack of experience and knowledge,unless 

they have been given supervison or instruction concerning 

use of the appliance by a peron responsible for their safety.

Children shall not play with the appliance. Cleaning and user 

maintenance shall not be made by children without 

supervision

.

If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualified persons 

in order to avoid a hazard. 

Warning: If the surface is cracked, switch off the appliance 

to avoid the possibility of electric shock, for hob surfaces of 

glass-ceramic or similar material which protect live parts 

Metallic objects such as knives, forks, spoons and lids should 

not be placed on the hob surface since they can get hot 

A steam cleaner is not to be used. 

Do not use a steam cleaner to clean your cooktop. 

The appliance is not intended to be operated by means of an 

external timer or separate remote-control system. 

WARNING: Danger of fire: do not store items on the cooking 

surfaces. 

The cooking process has to be supervised. A short term 

cooking process has to be supervised continuously. 

WARNING: Unattended cooking on a hob with fat or oil can 

be dangerous and may result in fire. NEVER try to extinguish 

a fire with water, but switch off the appliance and then cover 

flame e.g. with a lid or a fire blanket. 

Summary of Contents for MEC-30

























Reviews: