Midea MCHT60L07, Instruction Manual

Page: 12 / 28

TROUBLE SHOOTING
Malfunction Cause Solution
Light on, but
motor does not
work
The blades are blocked.
The capacitor is damaged.
Replace capacitor.
The motor is damaged. Replace motor.
The internal wiring of motor is cut off/
disconnected. An unpleasant smell
may be produced.
Replace motor.
Both light and
motor do not
work
Apart from the above mentioned, please check the following:
Light damaged.
Replace lights.
Power cord loosen.
Connect the wires properly as per
the electric diagram.
Oil leakage
Outlet and the air ventilation entrance
are not tightly sealed.
Unplug and seal with glue.
Leakage from the connection of
U-shaped section and cover. Remove U-shaped section and
seal with soap or paint.
Vibration
The blades, if damaged, can
cause vibrating.
Replace the blade.
The motor is not tightly fastened. Fasten the motor tightly.
The cooker hood is not tightly fixed. Fixed the cooker hood tightly.
Insufficient
suction
The distance between the cooker
hood and the cooker top is too large.
Readjust the distance.
Too much ventilation from open doors
or windows. Choose a new place to install the
appliance or close some doors / windows.
The
rangehood
inclines
The fixing screws are not tight
enough. Tighten the fixing screw and adjust it
horizontally.
The hanging screws are not tight
enough Tighten the hanging screw and adjust it
horizontally.
12
Clean the blades