III. OPERATION INSTRUCTIONS
7
Function
Keep warm mode
When the appliance is in operation, press the “Keep warm”
button if you want to keep warm your preparation. The
appliance will set automatically on the lowest power and
will stop after 120 minutes. To set again the power, Press
directly on the “+/-” button.
Simmer mode
To use this mode, press on the “Simmer” button. A lamp
lights up. The induction cooker entering the simmer state,
the default power level shall be level 2. Under this mode,
the power cannot be adjusted. When press “+/-” button or
slider again, the induction cooker entering the power
mode.
Fry mode
To use this mode, press on the”Fry” button. A lamp lights
up. The default power level shall be level 6. When press
“+/-” buttons or slider again, the induction cooker entering
the power state.
Boil mode
Boil mode is for boiling water. To use this mode, press on
the “Boil” button. A lamp lights up. The default power level
shall be level 10. After several minutes, it will turn to 8 level
power. In this mode, the default working time is 15 minutes.
Note:
It is recommended to put water that occupies 30%-
80% of the pot capacity when boiling water.
Boost mode
The boost button allows obtaining directly the highest
power level. By pressing again the boost button the
appliance will go back to the power o origin.
Lock mode
To lock the control pads during cooking, press on “Lock”
button. The indicator “Loc” will appear on the screen. In
this case, only the “On/Standby” button can be used to
switch off the appliance. To unlock the control panel, press
again “Lock” button during 3 seconds.
