6
1. In case of abnormalities such as abnormal noises, smell, smoke, etc., you
should immediately cut off power and stop use.
2. If the product cannot work, please check if the power supply is connected, if
the switch is put to the ON position and if fittings are installed in place.
3. If the product still cannot work after checks mentioned above, please consult
the designated repair centre for maintenance.
Product does
not work
Blender blade
stuck
ABNORMALITY ANALYSIS AND HANDLING
Abnormality Handling
Fault Analysis and Elimination
Symptom
Analysis of
Possible Causes
Countermeasure
The jar assembly is not
installed in place.
The jar assembly must be closed in place.
The inching switch is not
pressed.
Keep the switch press states.
The amount of processed
food is too much.
Reduce the amount of processed food.
Food sticking the blade.
Switch off electrical power if clean up the
ingredients on the clean blade.
The Products
found abnormal
odor, hot, smoke
and other
phenomena
The amount of processed
food is too much.
Reduce the amount of processed food.
The product running times
too long.
Reduce the motor running times.
The temperature of the
processed ingredients is
too high.
Do not exceed 60 °C.
Jar drain juice
(water)
The blade holder seal is
missing or not properly
mounted on the tool
holder assembly.
Check the blade holder seal states.
The jar is screwed into the
blade holder assembly
without tightening.
Check the jar whether on tightening.
The jar is screwed into the
jar cover without tightening.
Check the jar whether on tightening
Summary of Contents for MBL-1000
