background image

Service manual for Washing Machine                                                                                Midea America Company 

------------------------------------------------------------------------------------------------------------------------------------------------------- 

  5 

 

 

If the appliance emits a strange noise, a 

burning smell, or smoke, unplug the power 

plug immediately and contact your nearest 

service center. 

- Failing to do so may result in electric shock 

or fire. 

 

In the event of a gas leak (such as propane 

gas, LP gas, etc.), ventilate the area 

immediately. Do not turn any appliance or 

light on or off. 

- Do not use a ventilating fan. 

- A spark may result in an explosion or fire. 

 

Do not wash items contaminated with 

gasoline, kerosene, benzene, paint thinner, 

alcohol, dry cleaning detergent or other 

flammable or explosive substances. 

- This may result in electric shock, fire, or an 

explosion. 

 

Do not force the washer lid open while the 

washer is operating (high-temperature 

washing / drying / spinning). 

- Water flowing out of the washer may 

cause burns or cause the floor to be slippery. 

This may result in injury. 

- Forcing the lid open can damage the 

product or cause injury. 

 

Make sure to remove the packaging 

(sponge, styrofoam) attached to the bottom 

of the washer before using it. 

 

Do not insert your hand or a metal object 

under the washer. 

- This may result in injury. 

 

Do not attempt to operate this appliance if it 

is damaged, malfunctioning, partially 

disassembled, or has missing or broken 

parts, including a damaged cord or plug. 

- This may result in electric shock, fire or 

death. 

 

Do not touch the power plug with wet hands. 

- This may result in electric shock. 

 

Do not turn the appliance off by unplugging 

the power plug while the washer is in 

operation. 

- Plugging the power plug into the wall 

socket again may cause a spark and result 

in electric shock or fire. 

 

Keep all packaging material well out of the 

reach of children, as packaging materials 

can be dangerous to children. 

- If a child places a bag over its head, it may 

suffocate. 

 

Do not let children or infirm persons use this 

washer unsupervised. 

- Failing to do so may result in electric shock, 

burns or injury. 

 

Do not attempt to repair, disassemble, or 

modify the appliance yourself. 

- Do not use any fuse (such as cooper, steel 

wire, etc.) other than the standard fuse. 

- If you need to repair or reinstall the 

appliance, contact your nearest service 

center. 

- Failing to do so may result in electric shock, 

fire, problems with the product, or injury. 

 

If any foreign substance such as water 

enters the appliance in any area other than 

the tub, unplug the power plug and contact 

your nearest service center. 

- Failing to do so may result in electric shock 

or fire. 

 

If the water supply hose comes loose from 

the faucet and floods the appliance, unplug 

the power plug. 

- Failing to do so may result in electric shock 

or fire. 

 

Do not mix chlorine bleach with ammonia or 

acids such as vinegar. 

- Incorrect usage can produce poisonous 

gas, result in serious injury. 

 

Do not reach into the washer while parts are 

moving. Before loading, unloading, or 

adding items, press the START/PAUSE 

button and allow the basket to come to 

complete stop before reaching inside. 

- Failing to do so may result in electric shock, 

injury or fire. 

Summary of Contents for MAD160-A2801GPS



















































Reviews: