![background image](http://html1.mh-extra.com/html/midea/kjr-12b-dp-e-series/kjr-12b-dp-e-series_installation-manual_1791570016.webp)
13
Constant air volume testing
• You can use the unit’s automatic airflow adjustment
function to set external static pressure.
• Automatic airflow adjustment is the volume of blow-off
air that has been automatically adjusted to the quantity
rated.
1. Make sure the test run is done with a dry coil. If the
coil is not dry, run the unit for 2 hours in FAN ONLY mode
to dry the coil.
2. Check that both power supply wiring and duct
installation have been completed. Check that any closing
dampers are open. Check that the air filter is properly
attached to the air suction side passage of the unit.
3. Set the parameters for automatic airflow adjustment.
When the air conditioning unit is off, perform the
follwoing steps:
(To set external static pressure) (some models)
Summary of Contents for KJR-12B/DP-E Series
Page 19: ......
Page 21: ...1 80g E 2 130 130mm 3 4 5...