Midea KJ500G-TB32 Operating Manual Download Page 5

08

07

Replacement of the filter components 

1

2

3

4

5

6

Filter model: FC-50JA-1A (includes 2) 

When the last bar of the progress bar turns red 

and the replacement indicator light is on, it 

prompts that the HEPA filter needs to be 

replaced  

Replace

True HEPA

Take out the HEPA filter 

Remove the protective film of the filter 

Assemble the HEPA filter 

Long press the PM2.5 detection button for 

3s, the cleaning indictor light is off, and the 

Pre-Filter is restored. 

PM 2.5 

(Long press the 

HEPA filter for 3s) 

Long press for 3s 

Safety Warning 

Safety Precautions 

Notes 

This section describes the contents and importance of the safety matters to prevent personal injuries or 

property damages to the users or others. Please read the text on the basis of full understanding of the 

following contents, and be sure to abide by the safety matters as described. 

Do not use this appliance in wet or high temperature environment (like bathroom, toilet and kitchen). 

Before replacing the filter, please stop this appliance and cut off power. 

Do not place other items on top of the appliance, and forbid sitting or standing on this appliance. 

Please use the original filter provided by the factory. In case of other filters, the best results cannot be achieved. 

Do not use damaged or aged power cords; Forbid replacing the power cord without authorization. If the power cord is 

damaged, it must be replaced by the manufacturer, its service department or professional from similar department to 

avoid danger 

This appliance is only subject to 220-240V power supply, and please unplug the power cord when it is not used for 

a long time. 

Do not insert the fingers or objects into the air inlets or air outlets to prevent the product from physical damages or 

malfunction. 

Please unplug the power cord immediately and contact the service center in time when the appliance suffers abnormal 

sound or burnt smell or smoke. 

Do not spray flammable substances near the appliance; Do not spray water directly on the appliance or use chemical cleaners like 

alcohol or hydrochloric acid, etc.; Do not place water containers, medicines, or flammable materials on the appliance. 

Do not block the air inlets/outlets of the appliance with any item; 

This appliance cannot replace natural ventilation and other appliances like the vacuum cleaner, kitchen ventilator, etc. 

When the appliance is working, it must be placed on a dry, flat and stable floor, with at least 30cm space reserved around it. 

Do not put it in a place with direct sunlight. 

To prevent electromagnetic disturbance, the appliance must keep a certain distance from the TV, radio, microwave oven and others. 

The mist produced by the ultrasonic humidifier may affect the PM2.5 detection of this appliance, and both should maintain a certain 

distance. 

Do not disassemble or modify this appliance without authorization to avoid accidents. 

Do not pull the power cord to move the appliance. 

Please take care of the children and make sure that the children do not touch the appliance to avoid accidents. 

Matters that may Cause Minor Injury or Property Damages 

Summary of Contents for KJ500G-TB32








Reviews: