![background image](http://html1.mh-extra.com/html/midea/k714wm14/k714wm14_service-manual_1791762042.webp)
P.42
Operation step
Picture
18 Undo the heater
①
Undo the top cover,
control panel, lower cover
and front plate(methods
as followed).
②
Pull out the heater
plug. Pay attention to the
position of the plug so as
to not connect a wrong
circuit next time
.
③
Release the screw
fixing the heater.
④
Take out the heater.
19 Undo the NTC
temperature sensor
①
Undo the top cover,
control panel, lower cover
and front plate(methods as
followed).
②
Undo the NTC with
special tools.
Heater
NTC
In the red circle it is the
heater support, clamping
the heater.
5.UNPACKING WAYS OF MAIN PARTS
③
Nip out the clamp
between the outlet hose
and the drain pump, pull
out the outlet hose.
④
Loosen the screws
fitted on the drain pump,
and then pull out the drain
pump
.