4
3. Use Guide and Maintenance
WARNING:
Please cut off water source before replacing filters. Never plug filters in water running
state.
3.1 Guidance on Unpacking and Installation
1. Open the top of the packing case, take out the top foam and its accessories.
2. Put the accessories aside.
3. Unpack the product, install the water collector.
4. Take out the quick joint, and install it on the water pipe.
Function
Filter
Stage
Stage 1
Stage 2
Stage 3
Stage 4
3. Filter Function Introduction
PP Sediment filter
UF Membrane filter
C2 Post carbon
filter
C1 Pre carbon
filter
Coarse filtration of original water, and filter out
mud, sand, impurity, iron rust and suspension, etc
Absorb unusual colours and odors, remove residual
chlorine and organic substance in wate
Further absorb micro-molecules and organic substances
in water. Water tastes better
Remove bacteria, iron rust, colloids and impurities in
water
5. Use the after sale accessory—filter flushing tip, the arrow direction is the water flow direction,
insert the PE pipe in the quick joint.
Outlet
Water flower
inlet
