4.6 The Standby Control
While the refrigerator is opera ng, press and hold the SET key for 3 seconds, and the
refrigerator will enter standby
mode. The standby indicator will light up, and all
se ngs will stop working.
While the refrigerator is in standby, press the SET key, and the refrigerator will resume
normal opera on. In
since the refrigerator is now opera ng normally, the standby
indicator will turn itself o
ff
.
4.7 Duct Panel Opera on
1.
The
se ngs are 3 on the refrigerator control
panel and MID on the freezer temperature control dial.
2. If the ambient temperature is less than 10 degrees,
the recommended refrigerator control panel se ng is 4
or 5 with the freezer temperature control dial at the
COLDER posi on.
3. If the ambient temperature is higher than 43 degrees,
the recommended refrigerator control panel se ng is 4
or 5 with the freezer temperature control dial at the MID to COLDER posi on.
TIP: Leaving the freezer temperature control dial on the COLD se ng will help keep food cold
in the freezer. However, leaving the control dial on the cold se ng for an extended period of
me may cause items in the refrigerator to freeze.
5. CLEANING
5.1 Defros g
Auto-defrost for a frost-free refrigerator.
5.2 Cleaning the Interior and the Exterior of the Unit
Remove all the shelves and the vegetable and fruit drawers. To remove the drawers,
fi
rst
remove the lower door shelf.
Wipe the inside of the unit with a warm water and baking soda solu on and then rinse with
warm water using a sponge or cloth once you wring the excess moisture out of it. Wipe
completely dry before replacing the shelves and the vegetable and fruit drawers.
Use a damp cloth to clean the exterior, and then wipe with a kitchen appliance wax or a mild
liquid dish detergent. Dry and polish with a clean,
cloth. Make sure that the door is
closed to avoid the kitchen wax ge ng on the magne c door seal or inside the unit.
The grill of the condenser at the back of the unit and the adjacent components can be
vacuumed using a
brush
achment. Before cleaning the condenser, turn the
temperature dial to 0. Then sweep or vacuum up the dust.
15
