Placement
Proper use of show case
5
Thermostat
Connect the show case to power supply and
“
Power
”
indicator
（
the green light
）
will shine.The temperature of the chamber is
adjusted through thermostat knob, Clockwisely rotate the
thermostat knob and the interior temperature will decrease.
“
1-2-3-4-Quick freezing
”
stands for freezing. The number on
the thermostat knob does not mean a specific temperatures.
For refrigeration, temperature control knob should be set Refrigerator;
For freezing, the temperature control knob should be set Freezer;
For quick-frozen, the temperature control knob should be set to Quick
freezing.
The top space of the
shall be greater than 70cm, and
the distances from both sides
and backside shall be more than
20cm to facilitate the opening
and closing and heat dissipation.
Wipe the show case inside and
outside with warm moist rag
(add a small amount of detergent
in the warm water and wipe clean
finally with clean water).
show case
The show case is placed in a
well-ventilated indoor place;
the ground shall be flat, and
sturdy .
Before using the show
case, remove all
packaging materials
including bottom
cushions and foam
pads and tapes inside
the show case, tear off
the protective film on
the door and the show
case body.
Keep away from heat
and avoid direct
sunlight. Do not place
the show case in
moist or watery places
to prevent rust or
reduction of insulating
effect.
Start
The show case shall stay for half an hour before connecting
220V/50HZ power when it is firstly started.
The show case shall run 2 to 3 hours before loading fresh or
frozen foods; the show case shall run for more than 4 hours in
summer in advance considering that the ambient
temperature is high.
Dairy (like ice cream) should be stored near to the bottom of
the freezer as soon as possible, so as to increase the taste
of the frozen dairy products.
Summary of Contents for HD-437S
Page 1: ...Showcase HD 437S N ...
