Midea GS-120D, User Manual

Page: 10 / 33

9
Basic parameters
358X293X1600mm
Dimensions
GS-120D
Product name
Garment steamer
220-240V~
1500-1785W
2.0L
Model
power
Water tank capacity
Weight
voltage
6.0kg
frequency
50/60Hz
Safety Features
1. Temperature detection sensor: The Garment Steamer is equipped with
a built-in temperature sensing element. When there is abnormal temperature,
the temperature sensing element will emit signals to control the connection
and disconnection of the heating element, thus keeping the product
temperature within a suitable range.
2. Thermal fuse protection: The garment steamer has a thermal fuse installed.
When the temperature is abnormal and the thermostat fails, it switches off
directly to avoid any accident.
Maintenance and Storage
1. Turn the knob to “OFF” to switch off the garment steamer.
3. After cooling the product for 30 minutes, open the water tank cover, lift and tilt the
product, and pour out the water inside the product from the water tank cover.
4. Unscrew the drain plug counter-clockwise, the water in the principal machine will
flow out from the drain plug. (Note: Clear the accessories of the product before
unscrewing the drain plug in case the water flows out of the principal machine and
gets the accessories wet.)
5. After using the product for a long time, it is recommened to clean off the water scale
regularly to avoid impurities within the water staining the clothing; disassemble the
steam supply tube from the main body and fill the water into water inlet and shake the
machine. Then drain out the dirty water via the drainage hole.
The performance of the steamer will be better when repeating the above steps.
6. After winding the power cord and air duct, put the product in a dry place.
2. Disconnect the power plug.