6
II. Buttons on fan body (Fig.10) / Panel indication (Fig.11)
The buttons on the body such as air speed, on/off, air mode, mute, appointment/
timer, oscillation have the same functions as those of the corresponding keys on the
remote controller.
III. Height adjustment
Turn the outer joint to adjust the inner/outer upright post tube to the proper height,
and then tighten the outer joint. (Fig.3)
IV. Pitching air supply
When adjusting the upward or downward air supply of the fan, it is allowed to slightly
lift or press the nose or grill for adjustment.
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified
service personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the
motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTION
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.
Thoroughly remove soap film with dry cloth.
Fig.10
Fig.11