-8-
-9-
Cabinet Maintenance
Cleaning the Lint Filter
Cabinet
Operation when clothes or objects are outside
the spin tub (but within the cabinet)
MAINTENANCE
After using the washing machine, wipe the
moisture and stain with a piece of soft cloth.
To avoid damage on to the surface do not
use corrosive or volatile chemicals.
• Press the button head and pull
the lint filter out.
• Turn the filter net inside out and
rinse it with water.
• After inserting the claw, press the button
to insert it in place.
• A clicking sound means proper installation.
Button Head
Claw
1. Remove all screws of the frame with a screw driver and loosen
the connector of the brake belt.
2. Pull up the frame with both hands and turn the frame backwards.
3. Take out the clothes or objects.
4. Fasten the connector of the brake belt. Put back the frame and
tighten the screws.
Frame
After using the washing machine, never forget to do the following:
1. Disconnect the power plug.
2. Remove the water inlet hose.
Symptom
Reason
If the following symptoms occur, please disconnect the power plug and perform
the following checks:
The washing
machine does
not work.
The drain hose
does not work.
There is abnormal
noise during washing.
There is abnormal
noise and violent
vibration during
spinning.
• Check that the power supply is in good condition.
• Check that the power plug is inserted properly.
• Check that the wash timer knob or the spin timer knob
is not in the “0” position.
• Check that the drain hose is not laid too high.
• Check that the drain hose is not blocked by foreign matter.
• Check that there are no coins or any other foreign objects
dropped into the wash tub.
• Check that the washing machine is placed on flat, stable floor.
• Check that clothes are evenly distributed in the spin tub.
• Check that there are no clothes or detergent foam outside the
spin tub (but within the cabinet).
SPECIFICATION
POWER SUPPLY
LAUNDRY CAPACITY (kg)
MAX WATER LEVEL (L)
INPUT POWER (Watts)
NET DIMENSION (mm)
NET WEIGHT (kg)
FP-90LTL090GETM-B/R
230V / 60Hz
8
65
505
827x485x865
21
FP-90LTT060GMTM-B
230V / 60Hz
6
55
320
735X430X845
18
FP-90LTL100GETM-B/R
230V / 60Hz
10
80
535
870x512x957
23
TECHNICAL SPECIFICATIONS
