8
4. OPERATION
4.1 Switching On Your Unit
The temperature selector knob is located on the right hand sidewall of the refrigerator interior
Setting Min
Less Cool Temperature
Setting Med
Normal Operation(adequate for most situations)
Setting Max
Coolest Temperature
During high ambient temperatures e.g. on hot summer days. It may be necessary to set the
continuously in order to maintain a low temperature in the cabinet.
Give your refrigerator time to cool down completely before adding food. It is the best to wait
24 hours before adding food. The thermostat knob controls the temperature.
4.2 Noise Inside the Unit!
You may notice that your unit makes some unusual noises. Most of these are perfectly normal,
but you should beaware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system. It
has become more pronounced since the introduction of CFC free gases. This is not a fault and
will not affect the performance of yourunit. This is the compressor motor working, as it
pumps the refrigerant around the system.
4.3 Tips for Keeping Food in the Unit
Cooked meats/fishes should always be stored on a shelf above raw meats/fishes to avoid
bacterial transfer.Keep raw meats/fishes in a container which is large enough to collect juices
and cover it properly. Place the container on the lowest shelf.
Leave space around your food, to allow air to circulate inside the unit. Ensure all parts of the
unit are kept cool.
To prevent transfer of favours and drying out, pack or cover the food separately. Fruit and
vegetables do notneed to be wrapped.
Always let pre-cooked food cool down before you put in the unit. This will help to maintain
the internal temperature of the unit.
To prevent cold air escaping from the unit, try to limit the number of times you open the
door. Were commend that you only open the door when you need to put food in or take
food out.
5. CLEANING
5.1
Defrosting
.2 Cleaning the Interior and the Exterior of the Unit
Remove all the shelves and the salad bin. To remove the salad bin first remove the lower