![background image](http://html1.mh-extra.com/html/midea/egt-2-60-ix/egt-2-60-ix_user-manual_1790992080.webp)
23
Staring a wash cycle
1. Pull out the lower and upper basket, load the dishes and push
back the baskets. We recommend loading the lower basket first,
then the upper basket.
2. Add detergent.
3. Plug the power plug into the socket. Power supply: see last page of
the product data sheet. Make sure that the water supply is switched
on completely.
4. Open the door and press the power button.
5. Select a program, the answer lamp will light up. Then close the door.
The dishwasher will now start the wash cycle.
Changing the programme during the wash cycle
You can only change a wash cycle, if it has only been running for a short
time. Otherwise, the detergent may have already been released and the
dishwasher may have already drained the rinse water. If this is the case, the
dishwasher must be reset and the detergent dispenser refilled. Follow these
instructions to reset the dishwasher:
1. Open the door slightly to stop the dishwasher. When the movement
of the spray arm has stopped, you can open the door fully.
2. Press the program button for more than three seconds to put the
appliance in standby mode.
3. You can now change the program.
3 seconds
Summary of Contents for EGT 2.60 IX
