TIMER OFF Button:
Press this button to activate the Auto-off time
setting. Each press will increase the time setting in 30 minutes
increments if the setting time is lower than 10 hours. When the
setting time reaches 10h, each press will increase the time setting
1 hour in increments. To cancel the Auto-off time setting, just press
the button until the time setting is 0.0.
LED DISPLAY Button:
Press this button to clear the display on
the indoor unit, press it again to light the display .
LOCK Button:
Press this recessed button to lock all current
settings, and the remote controller will not accept any operation
except that of the LOCK. Use the LOCK mode when you want to
prevent settings from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock symbol will appear
on the remote controller display when the lock function is activated.
TURBO Button:
Note:
Push this button to activate the Turbo function
which enables the unit to reach the preset temperature in the
shortest tiime. When press this button on cooling mode, the unit
will blow strong cooling air with super high fan speed. When press
this button on heating mode(applicable to the unit adopts PTC
only), the PTC will be energized and bring fast heating operation.
The unit system will automatically revert back to the
previous settings after continue operating under powerful
cooling mode for about half an hour.
13
16
14
15
TIMER ON OFF
SET TEMPERATURE
Transmission Indicator
Temp./Timer display
Fan speed display
Mode display
ON/OFF display
This transmission indicator will light
when remote controller transmits
signals to the indoor unit.
Displays the current selected mode.
Including AUTO, COOL, DRY, HEAT
(cooling & heating models only) and
FAN.
The temperature setting (from 17 C
to 30 C) or timer setting (0~24h) will
be displayed. If FAN mode is
selected, there will be no display.
o
o
This indicator will be displayed when
the unit is operating.
Displays the selected fan speed:
AUTO, HIGH,
when the fan speed
is selected in AUTO speed. When
AUTO or DRY Mode is selected, there
will be no signals displayed.
MED and LOW.
Nothing displays
This display area shows the settings
of the TIMER. That is, if only the
Auto-on time function is set, it will
display TIMER ON. If only the Auto-off
time function is set, it will display
TIMER OFF. If both functions are
set, it will display TIMER ON OFF
which indicates you have chosen both
the Auto-on time and Auto-off time.
LOCK display is displayed when
pushing the LOCK button. Push the
LOCK button to clear display.
4
5
Mode display
(FAN mode)
FOLLOW ME display
When pressing FOLLOW ME button
in COOL or HEAT mode, the remote
sensing function is activated and this
indicator displays.
TIMER display
LOCK Indicator
11
TIMER ON Button:
Press this button to activate the Auto-on time
setting. Each press will increase the time setting in 30 minutes
increments if the setting time is lower than 10 hours. When the
setting time reaches 10h, each press will increase the time setting
1 hour in increments. To cancel the Auto-on time setting, just
press the button until the time setting is 0.0.
NOTE:
While the unit is running under SLEEP mode, it would
be cancelled if any other buttons are pressed.
SLEEP Button:
Press this button to activate the Energy-Saving
mode. Press again to stop the function. This function is available
on COOL, HEAT or AUTO mode only and maintain the most
comfortable temperature for you.
12
Indicators on display panel
