5
5
6
6
SILENCE/FP Button
TIMER ON Button
TIMER OFF Button
UP Button( )
Push this button to decrease the indoor
o
o
temperature setting in 1 C increments to 17 C.
DOWN Button( )
9
11
13
12
14
15
10
Press this button to initiate the auto-on time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10.0, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-on time to 0.0.
Press this button to initiate the auto-off time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10.0, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-off time to 0.0
Push this button to increase the indoor
o
o
temperature setting in 1 C increments to 30 C.
FOLLOW ME Button:
Push this button to initiate the Follow Me
feature, the remote display is actual tempera-
ture at its location. The remote control will
send this signal to the air conditioner every 3
minutes interval until press the Follow Me
button again. The air conditioner will cancel
the Follow Me feature automatically if it does
not receive the signal during any 7 minute
interval.
Swing Button
Swing Button
Used to stop or start horizontal louver move-
ment or set the desired up/down air flow
direction. The louver changes 6 degree in angle
for each press. If keep pushing more than 2
seconds, the louver will swing up and down
automatically.
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle
for each press. And the temperature display
area of indoor unit displays for one
second. If keep pushing more than 2 seconds,
the vertical louver swing feature is activated.
And the display area of indoor unit displays
, flashes four times, then the tempera-
IIII
ture setting reverts back. If the vertical louver
swing feature is stopped, it displays LC and
remains on for 3 seconds.
,
,
,
,
,
,
Buttons design might be slightly different
from the actual one you purchased depending
on individual models.
All the functions described are accomplished
by the indoor unit. If the indoor unit has no
this feature, there is no corresponding
operation happened when press the relative
button on the remote controller.
NOTE:
1
1
2
2
4
4
5
5
3
3
9
9
10
10
8
8
6
6
7
7
11
11
12
12
13
13
14
14
15
15
ON/OFF
ON/OFF
MODE
MODE
FAN
FAN
TEMP
TEMP
SILENCE
FP
SILENCE
FP
TIMER ON
TIMER ON
TIMER OFF
TIMER OFF
SLEEP FRESH
SLEEP FRESH
LED FOLLOW ME
LED FOLLOW ME
TURBO SELF CLEAN
TURBO SELF CLEAN
Active/Disable SILENCE function. If pushing
more than 2 seconds, the FP function will
be activated, pushing more than 2 seconds
again to disable.
When the Silence function is activated, the
compressor will operate at low frequency and
the indoor unit will bring faint breeze, which will
reduce the noise to the lowest level and creat
a quiet and comfortable room for you. Due to
low frequency operation of compressor, it may
result in insufficient cooling and heating capacity.
The FP function can only be activated during
the heating operation(only when the setting
mode is HEAT). The unit will operate at a
O
setting temperature of 8 C.The display window
of indoor unit will display FP .Press the
buttons of ON/OFF, SLEEP, FP, MODE, FAN
SPEED,UP or DOWN while operating will
cancel the FP function.
,
,
,
,
,
,
,
,
