6
7
Change the dust bag:
When the wind indicator turns to be red or loss of suction is noticed, it is time to empty the
dust bag or replace with a new bag.
Open the front cover by pressing front cover locker. Take out the bag then empty it.
01
Exchange the outlet filter:
clip down and remove the outlet cover by hands for exchange of filter.
02
The motor protection filter should be cleaned or exchanged after it is dirt.
03
Product Maintenance
Dust cleaning:
To maintain the suction power of the vacuum cleaner, please clean the dust regularly.
Dust full
In case of malfunction, please refer to the following table
TROUBLESHOOTING
If the problem still can’t be solved, please contact local service center.
Solution
- empty the dust bag in time
- clean the sponge filter
- clean the blockage
- dry the sponge filter in cool place after washing
- Inspect whether power plugs are tight or not or
the socket is live or not
- Press the switch button
- empty the dust bag in time
- clean the sponge filter
- clean the blockage
The vacuum
cleaner does
not switch on
Possible reason
- too much dust in the bag
- filter is blocked
- brush duct is blocked
- hasn't been fully dried after washing
- The power plugs are loose on the socket or
the power socket is not live
-The switch fails to be opened
- The dust bag is full
- The sponge filter is blocked
- Suction inlet of brush or the other accessory
is blocked
The machine
does not work
The machine
suddenly stops
Problem
Open
