CLEANING AND MAINTENANCE
Container
Normal Cleaning:
To prepare your new machine for initial use, the follow steps is under Normal
Cleaning.
Fill up container with half full warm water and add a couple of drops liquid dish
washing detergent to the container.
Push the lid completely.
Turn machine at "ON" position, start from low, and inerease the speed to high
slowly.
Run the machine on High speed for 30 to 60 seconds.
Turn off the machine, rinse and drain the container.
Follow Normal Cleaning instructions above.
Fill up container with half full water and adding 1 1/2 teaspoons of bleach agent.
Push the lid completely in jar.
Turn machine at "ON" position, start from low, and inerease the speed to high
slowly.
Run the machine on High speed for 30 to 60 seconds.
Turn off the machine, and allow mixture to stand in the container for an additional
1 1/2 minutes.
Pour bleach mixture out. Allow container to air dry.
Do not rinse after sanitizing.
Separate the lid and measuring cup. Wash the parts in warm soapy water. Rinse
clean under tap water, and dry. Reassemble before use.
1. Unplug the power cord.
8
Lid, Measuring Cup
• Electrical Shock Hazard.
• Disconnect power before cleaning machine.
• Failure to follow instructions can cause death or electrical shock.
Warning:
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
To Sanitize:
Motor Base