维修手册
Service Manual
, 2017 v1.0
8
/
11
1.
紧固图示两颗螺钉，将出风口安装到前壳上
2.
将前网图示扣脚扣到前壳相对应的扣位处
紧固
3.
紧固图示两个大垫圈头螺钉，紧固
PTC
与
出风格栅
4.
将风机组件放到前壳上相应位置，紧固图示
4
颗螺钉，固定风机组件
1. tighten the two screws and install the outlet
on the front shell.
2. fasten the front buckle to the buckle position
of the front shell.
3. fastening diagram showing two large
washers head screws, fastening PTC and air
outlet grille.
4. put the fan assembly in the corresponding
position on the front shell, tighten the
illustration of the 4 screws, and fix the fan
assembly.
3.5
紧固前后壳
Fastening front and rear shells
紧固图示位置
6
颗螺钉，固定前后壳
Fastening position 6 screws, fixing the front
and rear shells.
